| |
Trane XLi air conditioners
and heat pumps
Tranie XLi air conditioners and heat pumps represent a serious commitment to your comfort and peace of mind. They are some of the most advanced units Trane has ever created, and they are some of the most efficient. So you stay comfortable and energy smart, in even the worst weather, year after year. Relax. You have a Trane.
SEER and savings: understanding
energy efficient design
When shopping for a new system, efficiency is one of your most important considerations. An efficient system will not only lower your energy costs, it will also lower your impact on the environment.
System efficiency is measured in SEER, which stands for Seasonal Energy Efficiency Ratio. Similar to miles per gallon in a car, SEER is a measure of the overall efficiency of a complete heating and cooling system on a seasonal basis. The higher the SEER, the greater the system's energy efficiency, and the lower the overall carbon footprint of your household. |
|
 |
|
| |
A Trane communicating system works hard. And smart.
When installed in a Trane communicating system, your XL20i air conditioner or heat pump can be part of a hard-working team dedicated to your comfort. In a Trane communicating system, every component is in constant digital communication with every other, allowing the entire system to learn as it operates, optimizing itself for comfort and efficiency.
They operate so efficiently, in fact, that installing your XLi air conditioner or heat pump as part of a qualifying Trane system may earn you an energy tax credit up to $500.*
|
| |
Heat pump highlights
|
|
ComfortLink II Control Board
Controls communication between components to optimize your comfort and efficiency.
Charge Assist Charging
Simplifies service and maintenance, while improving charge accuracy for enhanced reliability and efficiency.
Dual-Climatuff Compressors
A smaller compressor operates most of the time for maximum efficiency, handing off to the larger compressor when extra cooling is needed.
Simplified Two-Wire Connection
Allows for easier installation while reducing the need for structural modification.
Full-Sided Louvered Panels
Galvanized steel panels protect internal components while preserving airflow efficiency.
Powder-Paint Finish
Virtually indestructible for maximum protection against corrosion and rust.
WeatherGuard Fasteners
Zinc-coated for long life and corrosion resistance.
All-Aluminum Spine Fin Coil
Designed to enhance airflow and heat transfer, while resisting corrosion and leaks far better than traditional copper and aluminum coils
DuraTuff Rustproof Basepan
Won't crack, corrode, rust or warp
Compressor Sound Insulator
Reduces operating noise for a quieter home environment
WeatherGuard II Top
Attractive, durable polycarbonate for lasting protection
Integrated Fan System
Unique blade-down design improves airflow, enhances performance and reduces sound levels |
|
| |
XLi Air Conditioners lineup
|
|
XL20i
Dual Climatuff compressors and communicating technology make the XL20i one of the most efficient, powerful air conditioners on the market, with up to 20.0 SEER operation. Potentially ENERGY STAR qualified when installed as part of a matched Trane system.
XL16i
Two-stage cooling prevents temperature swings, while providing the efficiency of up to 18.0 SEER and potential ENERGY STAR qualification when installed as part of a matched Trane system.
XL15i
With up to 16.25 SEER, the XL15i is hardworking, efficient, quiet and potentially ENERGY STAR qualified when installed as part of a matched Trane system.
|
|
| |
XLi Heat Pump lineup
|
|
XL20i
Dual Climatuff compressors and communicating technology make the XL20i one of the most efficient and powerful heat pumps on the market, offering up to 19.0 SEER and an HSPF of up to 9.0. Potentially ENERGY STAR qualified when installed as part of a matched Trane system.
XL16i
Two-stage heating and cooling prevent temperature swings, while providing the efficiency of up to 18.0 SEER and up to 9.2 HSPF. Potentially ENERGY STAR qualified when installed as part of a matched Trane system.
XL15i
With up to 16.25 SEER and 9.0 HSPF, the XL15i is hardworking, efficient, quiet and potentially ENERGY STAR qualified when installed as part of a matched Trane system.
|
|
| |
We value reliability as much as you do
M&M Electric and Heating & Air is an independent Trane dealer, and we know our reputation is made at every sale and with every installation. Therefore, we are as personally invested in your comfort as you are, and take great pride in creating your perfect indoor environment.
We are among the most highly-trained in the business, with advanced technical skills to optimize every installation and solve any issue. We have an extensive understanding of the movement and conditioning of air, and the expertise to create a perfectly balanced, ultra-efficient system for every home.
We believe in doing the job right, every time.
The Xli Registered Limited Warranty terms** include: 12-year limited warranty on compressor, 10-year limited warranty on outdoor coil and 10-year limited warranty on internal functional parts. An option to purchase transferability of your Registered Limited Warranty is available. Optional Extended Warranties are also available.
Extended Warranties can pay for labor and other costs not covered by manufacturer's limited warranty. Ask us for full warranty information at time of purchase. Warranties are for residential use only, some exclusions may apply. |
| |
|
| |
|
| |
Trane gas furnaces
Every Trane furnace is built to our standards, so it will exceed yours. We use premium materials and time-tested designs that deliver more comfort for less energy, with reliability that is legendary throughout the business. When you trust Trane, you're trusting the leader.
Exceptional comfort,
even on the coldest days
When comparing equipment, it helps to have a standard of efficiency with which to measure performance. For example, that standard is AFUE, or Annual Fuel Utilization Efficiency, a measure of how efficiently a furnace converts fuel into usable heat over the course of the entire heating season. The higher the AFUE, the less fuel you'll need to keep your home comfortable, the less you'll spend on energy and the lower your carbon footprint will be.
You'll find Trane 95 and 90 furnaces have impressively high AFUE numbers, especially when installed as part of a Trane-matched system. Because we're as committed to smart energy use as we are to your total comfort. |
|
 |
|
| |
|
| |
Trane gas furnace highlights
|
|
ComfortLink II Communicating Capability
Enables system to communicate its status and settings to the comfort control.
Communicating User Interface
Clearly displays ComfortLink II diagnostics to your installer for easy setup and service.
Simplified Three-Wire Connection
Allows for easy installation and is less invasive to the structure of your home.
Variable-Speed Blower Motor with Comfort-R
Allows quieter system startups and shutdowns, greater efficiency and more thorough heat circulation. Also helps control humidity levels during summer months.
Variable-Speed Draft Inducer
Works with modulating gas valve to enhance efficiency, comfort and reliability.
Adaptive Silicon Nitride Hot Surface Igniter
Highly reliable ignition system provides longer service life.
Heavy Steel Insulated Cabinet
Insulated panels hold more heat in the furnace, ensure greater durability and reduce operating sound.
Multi-Port-In-Shot Burners
Perfectly shape the flame cone for the maximum heat possible while using less fuel.
Automotive-Grade Gaskets And Insulated Blower Compartment
Help reduce operating sound and air infiltration
Primary Heat Exchanger
Crimped, not welded, to prevent cracks from heat stress. Stamped serpentine channel offers the greatest efficiency in less space.
Direct Vent
100% fresh air option reduces heat exchanger corrosion and ensures adequate combustion air.
Secondary Heat Exchanger
Made of AL29-4C stainless steel to capture more of the heat you pay for.
Fully Modulating Gas Valve
Highly reliable, proven design that operates between 40% and 100% depending on your specific heating needs, providing for ultimate comfort and greater efficiency.
|
|
| |
Trane gas furnace lineup
|
XC95m Variable-Speed Furnace with ComfortLink II Communicating Technology
Trane's top of the line furnace features the industry's first true communicating, fully-modulating gas valve, and an AFUE of up to 95% Thanks to ComfortLink II technology, the XC95m works with other system components to learn and adapt to your specific home, providing truly optimized, customized comfort and efficiency. |
|
 |
XV95 Furnace with Variable-Speed Motor and Comfort-R
Two-stage heating uses gradual, steady warmth for efficiency, with plenty of reserve heat on standby when needed. The XV95 can achieve up to 97% AFUE. During the summer, Comfort-R technology slows airspeed during startups for quieter operation and more precise humidity control. |
|
 |
XL95 Furnace with Two-Stage Heating
The XL95 can achieve up to 96% AFUE. With a four-speed blower motor that delivers consistent, even comfort, while the two-stage heating optimized your fuel use for greater efficiency. |
| |
|
|
|
|
|
|
|
 |
XT95 Single-Stage Furnace with High Efficiency Motor
Converts up to 95 % of its fuel while minimizing electrical usage, contributing to the efficiency of your entire system in both heating and cooling seasons. |
|
 |
XR95 with High Efficiency Single-Stage Operation
With an equal emphasis on comfort and efficiency, the Trane XR95 single-stage furnace converts 95% of the fuel it uses into warm, cozy heat. |
|
 |
XB90 with Single-Stage Heating
Dependable performance and efficiency so your home and budget can be comfortable. |
|
| |
Designed for maximum efficiency and ENERGY-STAR qualification
Trane 95 and 90 furnaces deliver at least 90% efficiency, far exceeding the government minimum standard of 78 AFUE for new furnaces. In fact, some Trane furnaces are so efficient, they are ENERGY-STAR qualified.
If you have a furnace that is at least 10 years old, it probably has an AFUE somewhere between 60 and 70, meaning up to 40 cents of every dollar you pay for fuel is wasted. Install a Trane high-efficiency furnace, and you'll enjoy the ultimate in energy savings as well as comfort. |
| |
* $300 maximum for a qualifying air conditioning system, heat pump or packaged system, $150 maximum for a qualifying furnace, and $50 maximum for a qualifying product with an advanced circulating fan. Tax credit is subject to IRS regulations. Consult a tax professional for advice on tax preparation.
** Registered Limited Warranty terms are available when you register within 60 days of installation, otherwise Trane's Base Limited Warranty terms will apply. |
(704)633-2506
